- 43 -
11.3
‘Beep’ sound – reaction on pressing function button
Parameter designed to enable switching on/ switching off the ‘beep’ sound
responsible for informing a user about pressing any key of scale overlay.
NO
- ‘beep’ sound switched off
YES
- ‘beep’ sound switched on.
11.4
Backlight and adjusting display brightness
Parameter designed to enable setting the brightness of the backlight, or switching
off the display brightness completely.
100
- maximum brightness of the backlight
10
- minimum brightness of the backlight
NONE
- display brightness switched off
11.5
Backlit turn-off time
Parameter <P6.5 BACKLIT OFF> is designed to activate display stand-by mode
when weighing process is not being performed (stable indication is a necessary
condition for activation of the stand-by mode).
NONE
– backlit turn-off time not activated
0.5; 1; 2; 3; 5
– time given in minutes
If the software registers stable indication for a specified time interval, set in
parameter <P6.5 BACKLIT OFF>, than the display goes out immediately.
The display gets backlit again upon change of indication (no stability pictogram on
the display) or pressing any key on the scale keypad. Blanking works also when
scale menu is entered.
11.6
Auto switch-off
Parameter <P6.6 AUTO OFF> is designed to enable use of function responsible for
automatic display deactivation (functions as button
). Upon display
deactivation, the other subassemblies are powered and the scale turns to stand-by
mode.
NONE
– auto switch-off not activated
