RADWAG AS X2 Series User Manual Download Page 16

Page: 16 / 132

- 16 -

Cleaning aluminium components:

While cleaning aluminium components use products acid by nature, e.g. spirit vinegar, lemon. Do not

use abrasive substances. Avoid using hard brush, this may cause scratches. It is recommended to

use microfibre cloth.

While polishing the surface use circular movements. Use clean, dry cloth

AS series – sequence of actions:

Undo and remove top pane
protection, next slide the pane out of
guide bar.

Remove back pane.

Remove side panes.

Side panes shall not be swapped
therefore it is necessary to remember
which one is right, and which one is
left in order to install them back
properly.

CAUTION! Do not remove the front

pane!

Summary of Contents for AS X2 Series





































































































































Search results

Summary of Contents for AS X2 Series

Reviews:

Related manuals for AS X2 Series

Brands by name

Popular brands

RADWAG AS X2 Series, User Manual

Search results

Summary of Contents for AS X2 Series

Reviews:

Related manuals for AS X2 Series

Brands by name

Popular brands