RADWAG AS X2 Series, User Manual

Page: 82 / 132

- 82 -
Select < Animal Weighing> mode, home screen featuring animal weighing pictogram in a top
bar is automatically displayed.
Info field provides the following information:
•
Gross weight,
•
Tare weight,
•
Product,
•
User,
•
Keys: parameters, adjustment, print header, print footer, product, user, databases.
19.1. SUPPLEMENTARY SETTINGS FOR ANIMAL WEIGHING MODE
The supplementary settings enable adjusting the working mode to your needs and requirements.
Averaging time
Time interval within which measurements are analysed. Obtained data is used for calculation of
measurement result. The result is given in [s].
Autostart
Parameter determining whether the measurement is to be carried out manually (on pressing key)
or automatically:
•
YES: automatically performed operation,
•
NO: manually performed operation.
Automatic operation basis: the object is measured automatically when put on a weighing pan and
when the indication exceeds pre-set threshold value (respective message is displayed).
On completed measurement procedure the following message is displayed.
Measurement of the next object can be carried out when: previous load has been removed and
< > key pressed. Now the new object can be loaded. The next measurement starts when the
pre-set threshold value is exceeded.
Auto threshold
Value expressed in mass units.
In order to start the measurement, the indicated value has to be greater than the threshold value.
For means of operation of other settings read point 8.10 „WEIGHING mode settings”.