RADSON ESSENTIAL THERMOSTAT, Installation & Maintenance Manual, Page: 9 / 74

9
Choices and allocation programmes
Correspondence days /
numbers
Monday 1
Tuesday 2
Wednesday 3
Thursday 4
Friday 5
Saturday 6
Sunday 7
Prior information:
display area
mode
auto prog
OK
boost
2
1- If you just set the time and day, the cursor moves automatically un-
der PROG.
From Auto, Comfort, Eco or Frost protection mode, then press
for 5 seconds. When the cursor positionned under the set time sym-
bol , press again.
The days of the week will scroll on display with the programmes that
you set for them, meaning Comfort
CONF
every day.
mode
auto prog
OK
boost
1
2- Press or .
The programme set for day 1 (1= Monday, 2 = Tuesday, etc.) will
flash.
mode
auto prog
OK
boost
1
3 - Chose the programme you want for this day with or .
Save by pressing .
mode
auto prog
OK
boost
1
1 2
4 - The programme assigned to the second day of the week (Tuesday)
will flash.
Repeat the procedure described previously (in point 3) for each day
of the week.
mode
auto prog
OK
boost
1
5 - Once you have chosen a programme for each day, confirm your selec-
tion by pressing . The days of the week will successively scroll on
display with the programmes that you set for them (P1, P2, P3, CONF
or ECO).
To exit the Programming mode, press twice.
Viewing the programmes that you have selected
- From Auto, Comfort, Eco or Frost protection mode, press for 5
seconds. Press twice, the programme for each day of the week
(Comfort, Eco, P1, P2 or P3) will scroll on display in front of you.
- To exit the programme viewing mode, press twice.
Manual and temporary exemption from a running
programme
This function allows you to change the setting temperature tempora-
rily until the next scheduled change in temperature or the transition to
0:00.
Example:
1-
The device is in Auto mode, the running programme is Eco 15,5°C.
mode
auto prog
OK
boost
3
3- This change will be automatically cancelled at the next change of
programme or transition to 0:00.
mode
auto prog
OK
boost
3
OPEN WINDOW DETECTION, ENERGY
SAVINGS
Important information about the open window detec-
tion
Important: the open window detection is sensitive to temperature va-
riations. The device will react to the window openings in accordance
with different parameters: temperature setting, rise and fall of tempe-
rature in the room, outside temperature, location of the device...
If the device is located close to a front door, the detection may be dis-
turbed by the air caused by opening door. If this is a problem, we recom-
mend that you disable the automatic mode open window detection (see
page 14) . You can, however, use the manual activation (see below).
2- By pressing or , you can change temporarily the desired tem-
perature up to 18°C for example.
mode
auto prog
OK
boost
3
Note: The cursor corresponding to the operating mode, i.e Eco mode in
our example, is blinking during the duration of the temporary deroga-
tion.
EN