7
A - Green colour
Ideal temperature.
Setting tempera-
ture ≤ 19°C
When the setting
temperature is
lower or equal to
19°C
mode
auto
prog
OK
boost
You can access the Comfort temperature set up from the Auto and
Comfort Mode. It is preset to 19°C.
SETTING THE COMFORT MODE
TEMPERATURE
Using
and
you can adjust the temperature from 7°C to 30°C by
intervals of 0.5° C.
Note:
you can limit the Comfort temperature,
see page 12 for more de-
tails.
mode
auto
prog
OK
boost
It is possible to see the estimation of energy consumption in kWh since
the last reset of the energy meter.
CONSUMPTION INDICATION ACCUMULATED
IN KWH, ENERGY SAVINGS
Display of the estimated power consumption
To reset the energy meter, from Auto, Comfort, Eco or Frost protection
mode, then proceed as follows.
Resetting the energy meter
1-
Press
.
To see this estimation, from Auto,
Comfort, Eco or Frost protection mode,
then press
.
To exit the display mode of
consumption: press any button, the
device is automatically in the previous active mode.
1 2 3 4 5 6 7
2- Press simultaneously
and
for more than 5 seconds.
To exit resetting the energy meter, press any button, the device is
automatically in the previous active mode.
CHILD ANTI-TAMPER,
KEYPAD LOCK/UNLOCK
Keypad lock
To lock the keypad, press the
and
buttons and hold them
down for 10 seconds. The padlock
symbol appears on the display,
the keypad is locked.
mode
auto
prog
OK
boost
3
Keypad unlock
To unlock the keypad, press the
and
buttons hold them down
for 10 seconds again. The padlock symbol disappears from the display,
keypad is unlocked.
When keypad is locked, only the key
is active.
If the device is on Standby mode when the keypad is locked, you
have to unlock it for the next heating on to access the setup.
7 DAY AND DAILY PROGRAMME
INTEGRATED, ENERGY SAVINGS
EN
Access to the programming mode
From Auto, Comfort, Eco or Frost protection mode, press
for 5
seconds to enter into the programming mode.
Schematic sequence of programming settings:
Setting time
Setting day
Programmes
choice
In this mode, you have the option of programming your device, by
setting one of the five programmes on offer for each day of the week.
Setting day and time
In this mode, you can set day and time to program your device in line
with your needs.
1-
From Auto, Comfort, Eco or Frost protection mode, press
for 5
seconds.
The cursor moves to the setting day and time mode.
mode
auto
prog
OK
boost
1
5 sec.
2-
Select using
or
. The two hour figures will flash.
The hours will scroll quickly, if you press the
or
and hold
them.
Save by pressing
.
mode
auto
prog
OK
boost
1
1
2
mode
auto
prog
OK
boost
1
1
2
3-
The two minute figures will flash.
Select using
or
.
Save by pressing
.
Summary of Contents for ESSENTIAL THERMOSTAT
Page 74: ...74...