RADSON ESSENTIAL THERMOSTAT, Installation & Maintenance Manual, Page: 16 / 74

16
3- Press to confirm. The new code is now saved.
mode
auto prog
OK
boost
RESTORING FACTORY SETTINGS
If the PIN code protection is disabled, the user and installer settings are
re-initialized:
1- From the PIN code setting, press .
rest
appears briefly on the
display.
mode
auto prog
OK
boost
4- Press again on to exit setting PIN code mode and go back to the
home display of the installer settings.
mode
auto prog
OK
boost
To exit the Installer settings, press twice.
2-
NO
flashes. Press or to select
YES
.
mode
auto prog
OK
boost
yes
= Factory settings reset
NO
= Factory settings not reset
mode
auto prog
OK
boost
5 sec.
To exit the installer settings, press twice.
Settings Factory settings
Operating
Comfort setting temperature 19°C
Boost duration 60 min.
Keypad lock Disabled
User settings
Eco mode temperature lowering-
level
-3,5°C
Frost protection temperature 7°C
Minimum set of Comfort setting
temperature
7°C
Maximum set of Comfort setting
temperature
30°C
Maximal Boost duration 60 min.
Maximum ambient temperature
for the automatic stop of the
Boost
35°C
Temperature unit °C
Installer settings
Automatic open window
detection
Enabled
PIN code protection Disabled
Value of the PIN code 0000
The following factory values will be effective:
3- Press the key for 5 seconds. The device returns to its initial confi-
guration and goes back automatically to the home display of the ins-
taller settings.
EN