RADSON ESSENTIAL THERMOSTAT, Installation & Maintenance Manual, Page: 8 / 74

8
5- To change and/or allocate programmes press . To exit the setting
the time and day mode, press 3 times.
mode
auto prog
OK
boost
1
1 2
4- The cursor above the number 1 (which represents the Monday) will
flash. Select the date using or .
Save by pressing .
Choices programmes
Schematic sequence of programmes:
Comfort Eco P1 P2 P3
Your device’s default setting is non-stop Comfort for 7 days a week.
Programmes overview
- Comfort: your device will operate in Comfort mode, 24 hours a day, as
regards each day selected.
Note: You can set the Comfort mode temperature to the temperature
you require (see Setting the comfort mode temperature page 7 .
- Eco: The device will operate 24 hours a day in Eco mode.
Note: You can set the temperature-lowering parameters (see Setting
the Eco mode temperature lowering-level page 12) .
- P1: your device will operate in Comfort mode from 06:00 to 22:00 (and
in Eco mode from 22:00 to 06:00).
- P2: your device will operate in Comfort mode from 06:00 to 09:00 and
from 16:00 to 22:00 (and in Eco mode from 09:00 to 16:00 and from
22:00 to 06:00).
- P3: your device will operate in Comfort mode from 06:00 to 08:00,
from 12:00 to 14:00 and from 18:00 to 23:00 (and in Eco mode from
23:00 to 06:00, from 08:00 to 12:00 and from 14:00 to 18:00).
Potential modifications of programmes
If the default time schedules for the P1, P2 and P3 programmes does not
suit your routines, you can change them.
Modifying the P1, P2 or P3 programmes.
If you modify the time schedules for the P1, P2 or P3 programmes,
the schedules will be modified for all the days of the week for which P1,
P2 or P3 had been set.
1- If you just set the time and day, go to step 2.
From Auto, Comfort, Eco or Frost protection mode, press
for 5
seconds.
When the cursor moves above the setting time symbol , press
shortly.
mode
auto prog
OK
boost
1
3- With or , select P1.
P1 will flash. Press for 5 seconds to make changes.
mode
auto prog
OK
boost
1
5 sec.
2
1
2- Press or . The cursor moves above prog .
mode
auto prog
OK
boost
1
Save by pressing .
4 - The P1 start time (which by default is 06:00) will flash.
Using or , you can change this time, by increments of 30
minutes.
mode
auto prog
OK
boost
2 1
Save by pressing .
5 - The P1 end time (which by default is 22:00) will flash. Using or
, you can change this time, by increments of 30 minutes.
mode
auto prog
OK
boost
2
1
6 - Press to exit the programming Mode and return to Auto Mode.
Note: without action on the keys, it will return to Auto after a few mi-
nutes.
EN