RADSON ESSENTIAL THERMOSTAT, Installation & Maintenance Manual, Page: 14 / 74

14
yes
= Factory settings reset
NO
= Factory settings not reset
3- Press the key for 5 seconds. The device returns to its initial confi-
guration and goes back automatically to the home display of the user
settings.
mode
auto prog
OK
boost
5 sec.
Parameters Factory settings
Operating
Comfort setting temperature 19°C
Boost duration 60 min.
Keypad lock Disabled
User settings
Eco mode temperature lowering-
level
-3,5°C
Frost protection temperature 7°C
Minimum set of Comfort setting
temperature
7°C
Maximum set of Comfort setting
temperature
30°C
Maximal Boost duration 60 min.
Maximum ambient temperature
for the automatic stop of the
Boost
35°C
Temperature unit °C
The following factory values will be effective:
Press to exit the user settings.
You access to installer settings in 4 steps:
From Auto, Comfort, Eco or Frost protection mode :
Setting sequence:
Open window detection PiN code lock Restoring factory settings
Information
display
mode
auto prog
OK
boost
1
Information
displays
mode
auto
prog
OK
boost
1
mode
auto prog
OK
boost
Press for 5
seconds
1
Press briefly
twice
2
Press for 10
seconds
3
Press briefly
4
InSt
= Installer
settings
mode
auto prog
OK
boost
INSTALLER SETTINGS
ACCESS
2-
NO
flashes. Press or to select
YES
.
mode
auto prog
OK
boost
OPEN WINDOW DETECTION, ACTIVATION/ DEACTIVATION OF THE AUTO MODE
The automatic mode enabled is the default setting.
mode
auto
prog
OK
boost
1 - Press or .
On
= automatic mode enabled.
OFF
= automatic mode disabled.
mode
auto prog
OK
boost
2 - To save and move automatically to the next setting, press .
To exit the user settings, press 3 times.
EN