RADSON ESSENTIAL THERMOSTAT, Installation & Maintenance Manual, Page: 13 / 74

13
• High temperature limit
Locking of the setting range using a maximum temperature increase,
preventing the temperature from being set above that
temperature.
The maximum setting is preset to 30°C. You can adjust from 19°C
to 30°C by intervals of 1°C.
8- To change the maximum temperature setting, press or .
To save and move automatically to the next setting, press .
To exit the user settings, press twice.
mode
auto prog
OK
boost
2 1
SETTING OF THE MAXIMUM DURATION
OF AUTHORISED BOOST
The maximum duration of Boost is preset at 60 minutes. You can adjust
it from 30 to 90 minutes by intervals of 30 minutes.
mode
auto prog
OK
boost
9 - The Boost symbol and the heating indicator appears on the display
and the preset duration of 60 minutes flash.
mode
auto prog
OK
boost
10 - Press or to display the desired duration.
mode
auto prog
OK
boost
11 - To save and move automatically to the next setting, press .
To exit the user settings, press twice.
SETTING OF THE MAXIMUM AMBIENT
TEMPERATURE FOR THE AUTOMATIC STOP
OF THE BOOST
When the Boost is enabled, the device has to heat the room until the
temperature limit: the maximum ambient temperature.
When it is reached, the Boost stops automatically.
It is preset at 39°C, you can adjust it from 25°C to 39°C by intervals of
1°C.
The Boost symbol and the heating indicator appear on the display and
the maximum temperature flashes.
12- You can set the Boost maximum temperature by pressing or
from 25°C to 39°C by intervals of 1°C.
13- To save and move automatically to the next setting, press . To
exit the user settings, press twice.
mode
auto
prog
OK
boost
SETTING THE TEMPERATURE UNIT
The pre-set temperature unit is degrees Celsius.
mode
auto prog
OK
boost
14- Press or to change the temperature unit.
mode
auto prog
OK
boost
15- To save and move automatically to the next setting, press .
To exit the user settings, press twice.
RESTORING FACTORY SETTINGS
In order to a coming back to factory settings, proceed in the following
order:
1- From the setting of the temperature unit, press .
rest
appears
on the display.
mode
auto prog
OK
boost
EN