29
Adjustability:
• Count down timer: starts from the chosen time, displays time remaining. If the time is exceeded, it
continues to count below 0.
• Count up timer: starts at 0 and displays the elapsed time up to 99 minutes 59 seconds.
• Count down timer (Stop type): starts from the chosen time, displays time remaining, and stops at 0.
• Model timer: cumulates ON time up to 99 hours 59 minutes each model. Once Model timer function is
turned off, the cumulate time will also be reset to "0:00".
• Independent to each model, and automatically updates with model change.
• In either TIMER mode, the timer beeps once each minute. During the last twenty seconds, there's a beep
each two seconds. During the last ten seconds, there's a beep each second. A long tone is emitted when the
time selected is reached. (UP/DOWN TIMER)
• To Reset, choose the desired timer with the CURSOR lever (while at the startup screen), then press and
hold DIAL for 1 second.
• Activation by either direction of SWITCH A-H, by THROTTLE STICK (STK-THR) (Using the
THROTTLE STICK is convenient if you are keeping track of fuel remaining, or for an electric, how much
battery is left), by LOGIC SWITCH Lsw1-Lsw3 or by the power SWITCH (PWR SW).
• Also the reset switch can be assigned (SWITCH A-H or LOGIC SWITCH Lsw1-Lsw3)
Goals
Steps
Inputs
Set timer 2 to count
down 4 1/2
minutes,being
controlled by Throttle
Stick position. This
utilized to keep track of
catual Throttle on time
to better cooperate with
fuel/battery usage.
Open BASIC menu,then to
TIMER
for 1s .(If ADVANCE
again) .
to TIMER ,PUSH
Go to TIMER <2>
to TIMER
<2>
，
PUSH
Adjust time to 4min.30sec.,
count down
to 4,PUSH.
to 00 TIMER
<2>
，
PUSH
to 30,PUSH
Assign switch at ST-THK and
set trigger point.
to SWA TIMER
<2>
，
，
to ST-THK
，
PUSH
Throttle Stick down to 50%,PUSH for 1s to
NULL.
Throttle Stick down to desired position(Ex:1/4
stick) PUSH button for 1s to set.
Close
2.3.13 TRAINER:
For training novice pilots with optional trainer cord connecting 2 transmitters. The instructor has several
levels of controllability.
【
TRAINR
】
1
：
AILE FUNC
INH
2
：
ELEV FUNC
3
：
THRO FUNC
CH1
：
AILE
4
：
RUDD FUNC
FUNC
5
：
GEAR FUNC
6
：
FLAP FUNC
7
：
AUX1 FUNC
8
：
AUX2 FUNC
Adjustability:
• NORM: When the TRAINER SWITCH is ON, the channel set to this mode can be controlled by the
student. The set channel is controlled according to any programming set at the student's transmitter.
• FUNC: When the TRAINER SWITCH is ON, the channel set to this mode can be controlled by the
student, controlled according to any mixing set at the instructor's transmitter.
