Radioddity GA-5E, User Manual

Page: 23 / 108

20
Channel Mode (MR): Used for selec � ng preprogrammed channels.
Ex 1. Programming a Channel Repeater O ff set with CTCSS Tone
EXAMPLE New memory in Channel 10:
RX = 432.55000 MHz
TX = 437.55000 MHz (This is a (+ 5) O ff set)
TX CTCSS tone 123.0
a. Press the [EXIT] bu � on to switch between menus.
b.
Press and hold the
[MENU]
key to set the radio to VFO mode, and the VFO icon is displayed on the right.
c. [MENU][2][9][MENU] [1] [0] [MENU] [EXIT] Deletes Prior Data in channel (Ex. 10)
d. [MENU] [1][3] [MENU]
123.0
[MENU] [EXIT] Selects desired TX encode tone
e. Enter RX frequency (Ex. 43255000 )
f. [MENU] [2][8] [MENU] [1][0] [MENU] Enter the desired channel (Ex 10)
-->>[EXIT] RX has been added
g.
Enter TX frequency (Ex.
43755000
)
h. [MENU] [2][8] [MENU] [1][0] [MENU] Enter the same channel (Ex 10)
-->> [EXIT] TX has been added
i. Press and hold the [MENU] key to return to the MR mode and the channel number will reappear.
Ex 2. Programming a Simplex Channel with CTCSS tone
EXAMPLE New memory in Channel 10:
RX =
432.6625
MHz
TX CTCSS tone 123.0
a.
Press the
[EXIT]
bu � on to switch between menus.
b. Press and hold the [MENU] key to set the radio to VFO mode, and the VFO icon is displayed on the right.
c. [MENU] [2][9][MENU] [1] [0] [MENU] [EXIT] Deletes Prior Data in channel (Ex. 10)
d. [MENU] [1][3] [MENU] 123.0 [MENU] [EXIT] Select desired TX encode tone (Ex 123 CTCSS)
-->>
Use
[EXIT]
to select Upper display