Radioddity GA-5E, User Manual

Page: 29 / 108

26
As DCS codes, the CTCSS codes can be added to the channels for crea � ng new private channels.
Note: there are 50 groups of CTCSS tones. In channel mode the CTCSS tones cannot be changed.
(13) Transmi � ng DCS (Tx DCS) - MENU No.12
In this Menu you ac � vate DCS codes in tx mode. You can choose between normal R-DCS (D023N-D754N) and inverted R-DCS
(D023I-D754I)
Note: the groups of DCS codes are 208. DCS codes cannot be changed in channel mode.
(14) Transmi � ng CTCSS (Tx CTCSS) - MENU No.13
In this Menu you can set a CTCSS tone in tx mode.
You can choose: O ff or CTCSS (67.0 to 254.1 Hz)
Note: there are 50 groups of CTCSS tones. In channel mode the CTCSS tones cannot be changed.
(15) Voice prompts func � on (Voice) - MENU No. 14
With this func � on, you ac � vate a voice that informs you about any opera � on/ selec � on you are doing.
(16) ANI-ID (ANI-ID) - MENU No.15
With this func � on you can set your ID-code. It can be programmed by the proper programming so � ware. You can edit up to
5 digits.
(17) DTMFST (DTMFST) - MENU No.16
Determines when DTMF Side Tones can be heard from the transceiver speaker. You can choose amongst four op � ons:
• O ff : No DTMF Side Tones are heard
• DT-ST : Side Tones are heard only from manually keyed DTMF codes
• ANI-ST: Side Tones are heard only from automa � cally keyed DTMF codes
• DT+ANI: All DTMF Side Tones are heard
(18) Signal code (S-CODE) - MENU No.17