Radioddity GA-5E, User Manual

Page: 16 / 108

13
13/17. Depending on the se � ng, it will show the frequency in use, the channel name, the menu se � ng, etc
14/15.
Indicates the
VFO
in use and the current menu or func � on se � ng. This icon is displayed close to the band in use or to
the menu se � ngs.
16/18. Indicates the
channel number
that you stored
Ba � ery Level Indicator
When the ba � ery level indicator reads the ba � ery is depleted. At this point the radio will start beeping periodically as
well as fl ash the backlight of the display and when voice prompts are enabled, a "Low Voltage" announcement will be heard,
indica � ng that you need to change your ba � ery or put your radio in the charger.
4.3 Status Indica � ons
The status LED has a very simple and tradi � onal design.
LED Indicator Radio Status
Constant Red Transmi � ng.
Constant Green Receiving.
4.4 Main keypad controls
• [MENU] key: It is used for ac � va � ng the MENU, choose each MENU selec � on and con fi rm the parameter.
In standby mode, press and hold the key to switch between frequency (VFO) mode and channel (MR) mode.
To save frequencies to channel memory you must be in Frequency (VFO) mode. Memory mode is some � mes also referred to
as Channel mode.
•
▲
key: Press it for more than 2 seconds, the channel and frequency will move upwards rapidly; in SCAN mode, press this
control to move the scanning upwards.
•
▼
key: Keep it pressed it for more than 2 seconds, the channel and frequency will move downwards rapidly; in SCAN mode,
press this control to move the scanning downwards.
• [EXIT] key: press to exit the Menu and func � ons. A/B (appears on the display): push to select the desired frequency (VHF