58
Trunk Scanning
To turn priority ID scanning on or off, press
PRI
during ID while scanning in Close Mode.
“PRI”
appears when priority scanning is turned on.
Note:
Priority ID scanning does not
operate when priority IDs are locked out.
See
“Locking Out Talk Group IDs”
on p. 51
.
Motorola Trunking Systems
Motorola Type II 800 MHz
On the 800 MHz trunking band, you can select the
channel plan (Normal , Splinter, or Custom). On
the 900 MHz trunking band, you do not need to
set any other settings.
Follow these steps to program 800 MHz band
Motorola trunking.
1.
Press
ENT/PGM
then
TRUNK/MODE
to enter
the ID Programming Mode.
2. Press
FUNC +
T
or
S
to select the desired bank.
3.
Repeatedly press
FUNC + TRUNK/MODE
and select MOT Mode.
4.
Press
FUNC + 3
.
5.
Select NORMAL, SPLINTER or CUSTOM and
press
ENT/PGM
.
•
If you are uncertain about the channel plan,
use the default setting of Normal. The base
frequency in Normal is 851.0125 MHz.
•
If you cannot receive with the normal setting,
change to SPLINTER. The base frequency in
Splinter is 851.0000 MHz.
•
If you cannot receive in either the Normal
or Splinter channel plans, try Custom. In the
Custom channel plan, you can set the base
frequency, offset channel and spacing for
800MHz Trunking System.
