17
Scanner Setup
“
Erase Frequency”
will appear; press
ENT/PGM
to erase.
•
The scanner automatically rounds the
entered number to the nearest valid
frequency. For example, if you enter 151.473
(MHz), your scanner accepts it as 151.475.
•
After a transmission, the scanner
automatically pauses for 2 seconds on this
channel before proceeding to the next
active transmission. Press
•/DELAY
to turn
the delay function on or off. The scanner
stores this setting in the channel.
•
To store trunked system frequencies, see
“Programming Trunked Frequencies”
on p. 46.
If you do not have a list of frequencies in your
area, use a chain, fine tune, or service search to
find a transmission (see
“Searching”
on p. 21). Also
refer to www.radioreference.com.
Entering Channel Text Tags
To store text tags for easy identification of channels:
1.
From Manual Mode, press
ENT/PGM
to put
the scanner in Programming Mode.
2.
Enter the channel number where you want to
store a text tag. If you make a mistake, press
CL
repeatedly until the display is cleared.
3.
Press
MAN/MENU
.
4.
Press
PSE/TEXT
to put the scanner into
channel Text Tag Mode. The cursor appears.