63
Trunk Scanning
preset fleet maps to choose from, and it is best to
start with these when setting up a Type I or hybrid
trunk scanning bank.
If none of the following preset fleet maps allow
you to follow complete conversations, then you
probably need to program your own fleet map
(see
“Programming a Custom Fleet Map”
on p. 63).
Selecting a Preset Fleet Map
1.
Press
FUNC
+
MAN/MENU
to open Menu
Mode.
2.
Select
Trunk Option
, then press
ENT/PGM.
Select a bank, then press
ENT/PGM.
3.
Select
MOT,
and press
ENT/PGM.
4.
Select
Edit Fleet Map,
and press
ENT/PGM.
5.
Select
Preset,
and press
ENT/PGM.
6.
Select the preset map you want to use and
press
ENT/PGM.
(See
“Appendix B: Fleet Maps”
on p. 80 for a description of the preset fleet
maps).
Note:
When the scanner searches for trans-
missions, Type I fleet and subfleet IDs such
as 100-12, 100-9, 000-12, or 400-8 display.
Programming a Custom Fleet Map
You must set the fleet map if you want to receive
a Motorola Type I system. Fleet maps are included
along with other information about Motorola Type
I systems at www.radioreference.com.
Follow these steps to program a custom fleet map.
1.
Press
ENT/PGM
then
TRUNK/MODE
.
2.
Press
FUNC +
T
or
S
to select the desired
bank.
3.
Press
FUNC + 8
, then select Custom and
press
ENT/PGM
.