68
Advanced Programming
Advanced Programming
Transferring Data To or From another
Scanner or PC
You can clone your scanner by transferring the
programmed data to or from another PRO-162
scanner using a connecting cable. You can also
upload or download programmed data from a PC
through wired programming.
Cloning Your Scanner
You can clone all the frequencies, trunking talk
groups, and fleet maps programmed in your
PRO-162 to another PRO-162 or PRO-160 using
an interface cable with 1/8-inch phone plugs on
both ends.
1.
Make sure the scanners are turned off and
then plug the cable into each scanner’s
PC/IF
jack.
2.
Turn on both scanners.
“Clone Mode [UP] to send”
appears.
3.
Press
S
.
“Confirm Send Data? [1] to Yes [CL] to No”
appears.
4.
Press
1
to send the data to the other unit or
press
CL
key to cancel the operation.
5.
When the data transfer is completed,
“Clone
Mode Finished”
appears. If the data transfer is
not successful,
“Clone Mode Error”
appears.
6.
After the clone operation is complete, remove
the cable, turn both units off and then on
again.
Wired Programming
You can transfer programming data to your
scanner using your PC and an optional interface
cable and software (available at your local