16
Scanner Setup
Manual Mode
To enter Manual Mode from any other mode,
press
MAN/MENU
.
Programming Frequencies into
Channels
Before the scanner can begin to scan, you must
program a frequency into at least one channel.
To locate and store specific frequencies into
channels for later use:
1.
From Manual Mode, press
ENT/PGM
to put
the scanner in Programming Mode.
2.
Press
FUNC +
S
or
T
to select a bank.
3.
Press
S
or
T
to select a channel
4.
Use the number keys to enter the frequency,
using
•
for the decimal point.
5.
Press
ENT/PGM
to store the frequency into
the channel.
6.
To program the next channel in sequence, press
S
or
ENT/PGM
and repeat Steps 4 and 5.
Programming Notes:
•
If you entered an invalid frequency in Step 5,
“
Invalid Freq
.” appears and the scanner beeps
error tones. Enter a valid frequency.
•
If you entered a frequency in Step 5, which
already exists on another channel, the
scanner beeps an error tone and displays
that channel. Press
CL
to clear the display,
or press
ENT/PGM
to store the frequency in
both channels.
•
To erase a frequency from a channel, from
Manual Mode press
ENT/PGM
to enter
Programming Mode and then press
CL
.
