77
Additional Information
Problem
Cause
Solution
Scanner won’t
track a trunked
system.
The transmission
might not use a
system that can
be tracked by your
scanner.
Scan another
transmission.
The data
frequency is
missing.
See “Programming
Trunked Frequencies”
on p. 46 and “Scanner
is not acquiring a data
channel” on page 76.
The system you
are trying to track
is a Type I system
and the scanner is
set to scan Type II
systems.
Set the scanner to
receive Type I trunked
frequencies. See “Type
I and Hybrid Trunked
Systems” on p. 62.
Scanner won’t
scan a Type II
system.
Program a fleet map
and set all blocks to
size code 0. See “Pro-
gramming a Custom
Fleet Map” on p. 63
and “Type I and Hybrid
Trunked Systems” on
p. 62.
Scanner is set
to receive Type I
trunked frequen-
cies, but does
not scan them.
The fleet map you
have selected or
entered might be
incorrect.
Check the fleet map and
correct it if necessary
See “Type I and Hybrid
Trunked Systems” on p.
62. and “Programming
a Custom Fleet Map”
on p. 63.
Missing replies
to conversations.
The system you
are trying to track
is a Type I system,
and the scanner is
set to scan Type II
systems.
Set the scanner to
receive Type I trunked
frequencies. See “Type
I and Hybrid Trunked
Systems” on p. 62
The selected fleet
map is incorrect.
Try another preset fleet
map or program a fleet
map See “Type I and
Hybrid Trunked Sys-
tems” on p. 62
Frequencies are
not programmed.
Enter all of the trunk’s
frequencies. See “Pro-
gramming Trunked
Frequencies” on p. 46.