25
Searching
Service Bank Search
The scanner is preprogrammed with all the
frequencies allocated to Marine, CB band, FRS/
GMRS/MURS, Police (Fire/Emergency), Aircraft
and Ham band transmissions.
To search the service banks:
1.
Press
SRCH
. The current service bank appears
and the scanner starts searching. To select a
different service bank, press
SRCH
again.
2.
Press
T
or
S
to begin searching the newly
selected service. Or, the scanner will start
searching automatically after two seconds.
SR0
Note:
Because there are many different
frequencies allocated to Aircraft and
Ham, it can take several minutes to search
all the service frequencies.
To directly access a channel (only for Marine, CB
band, and FRS/GMRS/MURS):
1.
From Service Search Mode, press
PSE
to go
to Service Search Pause Mode.
2.
Press the number key that corresponds to
the desired channel. Press
PSE
to select the
channel.
Search Skip Memory
You can skip up to 200 specified frequencies
during chain, fine tune, service search, or Signal
Stalker I. This lets you avoid unwanted frequencies
or those already stored in a channel.