54
Trunk Scanning
See the following subsections for specific
requirements for entering Motorola, EDACS and
LTR talk group IDs.
Motorola
To enter a Motorola Type II Talk Group ID:
1.
Enter the ID you want to store by using the
keypad.
2.
Press
ENT/PGM
.
To enter a Motorola Type I Talk Group ID:
1.
Enter the ID you want to store by using the
keypad (ID = Block Fleet
•/DELAY
+ Subfleet number).
2.
Press
ENT/PGM
EDACS
AFS (‘Agency-Fleet-Sub fleet’) is the numbering
format used in the scanner to display and enter
EDACS talk groups. The scanner shows EDACS
talk groups in AFS format and can also work in
decimal format. (See
“Selecting The EDACS Talk Group
ID Format”
on p. 66). AFS allows you to enter full or
partial EDACS Talk Group IDs.
To enter a full EDACS ID:
1.
Enter the Agency number.
2.
Press
•/DELAY
to enter the dash.
3.
Enter the fleet number and subfleet number.
4.
Press
ENT/PGM
EDACS Partial Group Numbers
You can enter partial group numbers in an EDACS
talk group. By entering only the desired portion
of a group, you can select either 128, 8, or 1 talk
group. For example, you might program every
talk group in a police department by pressing just
four keys.