11
Scanner Setup
3.
Insert two AA batteries (not included) into the
battery compartment and two AA batteries
into the battery compartment cover, matching
the polarity symbols (+ and -) marked inside.
4.
Replace the cover.
Warning:
Only set the
Battery Switch
to
Ni-MH
for use with nickel metal hydride
(Ni-MH) rechargeable batteries.
Never use non-rechargeable
batteries when the switch is set to Ni-MH.
To charge batteries:
1.
Set the Power Switch to Ni-MH.
2.
Install rechargeable batteries.
3.
Connect an external power source to the
DC 9V 300mA jack.
The scanner stops charging automatically after a
maximum of 14 hours.
Warning:
Do not attempt to charge batteries
if non-rechargeable batteries are installed in
the scanner and the switch is set to Ni-MH, or
if you are unsure of the switch’s position. Non-
rechargeable batteries will get hot and can explode if
you try to recharge them.
Battery Switch