manualshive.com logo in svg

Radio Shack 20-162, User Manual

Share
Download
Radio Shack 20-162 User Manual Download Page 4

4

C

ontents

Trunk Scanning ........................................................ 46

Trunk Operation.............................................................. 46

Programming Trunked Frequencies....................... 46
Using Trunk Scanning Scan Delay .......................... 49
Skipping a Trunked Bank......................................... 49

Talk Group IDs ................................................................ 49

Finding Talk Group IDs  ............................................ 49
Storing Talk Group IDs.............................................. 50
Talk Group ID Text Tags ............................................ 50
Pausing on an Active Talk Group ID ....................... 51
Manually Entering a Talk Group ID ......................... 51
Locking Out Talk Group IDs ..................................... 51

Unlocking Locked-Out Talk Group IDs................. 52

Manually Programming Talk Group IDs................. 53

Motorola .................................................................. 54
EDACS...................................................................... 54
EDACS Partial Group Numbers............................ 54
LTR ........................................................................... 55

Clearing Talk Group IDs............................................ 56
Clearing All Talk Group IDs in a Bank .................... 56
Using Talk Group ID Lists ......................................... 56

Turning a Talk Group ID List On or Off ................ 57
Scanning the Talk Group ID Lists......................... 57
Priority Scanning Talk Group IDs......................... 57

Motorola Trunking Systems .......................................... 58

Motorola Type II 800 MHz ........................................ 58

Setting the Base Frequency, Offset Channel, and 
Spacing for 800 MHz Custom .............................. 59

Motorola UHF / VHF  ................................................. 60
Type I and Hybrid Trunked Systems........................ 62
Selecting a Preset Fleet Map .................................. 63
Programming a Custom Fleet Map ........................ 63
Setting Control Channel Only Mode ....................... 64
Setting the Status Bit Feature (S-Bit) ..................... 65
Setting the Disconnect Tone Detect Function....... 66

Summary of Contents for 20-162

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands