Neighbours&Statistics
•
Parameters
List box: Default, Manual,
Default = Default
Default
– Default (recommended) values are set and can not be edited.
Manual
– Values can be set manually.
There are 2 tables with diagnostic information in the main menu - Diagnostic/Neighbours, Diagnost-
ic/Statistic. The Neighbours table displays Watched values from RipEX and from all its neighbours.
(Neighbour = RipEX, which can be accessed directly over the radio channel, i.e. without a repeater).
There is statistic information about the traffic volume in the Statistic table.
○
Watched values broadcasting period [min]
Default = 10 min, [0 = Off]
RipEX periodically broadcasts its Watched values to neighbouring units. The Watched values
can be displayed in Graphs and Neighbours menu.
Note
: When Bridge mode is used, watched values broadcasting creates collisions for user traffic.
Be careful in using this feature.
○
Neighbours&Statistic log save period [min]
Default = 1440 min (1 day) [10 - 7200 min]
This is the period, in which Neighbours and Statistics logs are saved in the archive and cleared
and new logs start from the beginning.
Note:
The history files are organized in a ring buffer. Whenever a new file is opened, the numbers
of files are shifted, i.e. 0->1, 1->2, etc. There is a history of 20 log files available
Graphs
•
Parameters
List box: Default, Manual,
Default = Default
Default
– Default (recommended) values are set and can't be edited.
Manual
– Values can be set manually.
Graphs displays history of Watched values and history of some of the items from the Statistic table.
Displayed values are stored in each RipEX including data from selected five neighbouring units.
Neighbour = RipEX, which can be accessed directly over the Radio channel (not over Ethernet),
i.e. without a repeater. The graph data is stored in files, each file contains 60 samples of all values.
The sampling period can be configured. There are two types of graphs- Overview and Detail.
Overview graphs cover a continuous time interval back from the present, they use relatively long
sampling period. Detail graph is supposed to be used in case of a special event, e.g. an alarm, and
the sampling period is much shorter.
○
Logged Neighbour IP’s
Default = 0.0.0.0
Up to 5 IP addresses of neighbouring units can be set. (Neighbour = RipEX, which can be ac-
cessed directly over the radio channel, i.e. without a repeater). Watched values from these units
are stored in the graph files and can be displayed afterwards.
○
Overview graph sampling period
List box: 1, 2, 4, 12 hours
Default = 12 hours
The 60 samples per graph file result in (depending on the sampling period) 60, 120, 240 or 720
hours in each file. There are 6 files available, so total history of saved values is 15, 30, 60 or
180 days. The Overwiev graph files are organized in a ring buffer. Whenever a new file is opened,
the oldest one is replaced.
○
Detail Graph sampling period
73
© RACOM s.r.o. – RipEX Radio modem & Router
Advanced Configuration
