Configuration can be uploaded from a file. Fill in the file path, or browse your disk in order to
find the file. When a file is selected, it can be uploaded.
○
Upload
– uploads configuration from the selected file and activates it. The unit reboots afterwards.
7.6.3. Firmware
Fig. 7.18: Menu Maintenance Firmware
The firmware in the unit consists of several parts, however they come in one firmware package
(file_name.cpio). Individual part names and their versions can be seen. There can be two versions of
firmware packages stored within the unit – “Active” and “Archive”. Unit is always using the Active version.
The Archive version is there just for convenience and safety of firmware manipulations. It can be also
uploaded to a remote unit over the Radio channel.
•
Upload to Archive
– Fill in the file path, or browse your disk in order to find the file. When the file
is selected and the "Upload to Archive" button pressed, it is uploaded and becomes the Archive
firmware.
•
Archive to Active
– when pressed, the Active firmware is substituted by the Archive firmware.
Either “All” or only “Only the different” versions are replaced according to the
Versions
list box
setting. The unit reboots afterwards.
•
Copy Archive to station
– The Archive firmware package can be copied to another unit. Fill in the
IP address
of the desired unit and press the button.
7.6.4. Password
Fig. 7.19: Menu Maintenance Password
It is highly recommended to change default password (admin) even if the user name remains always
the same (admin). When the Apply button is pressed, the unit reboots.
7.6.5. Miscellaneous
•
Reboot
– when pressed, the unit correctly shuts down and starts again (performs the cold start
which equals to a power cycle). The reboot time is approx. 25 sec.
113
© RACOM s.r.o. – RipEX Radio modem & Router
Advanced Configuration
