1257 User Manual
EADS North America Defense
SCPI Command Basics 5-17
Test and Services, Inc.
©
2001
*IDN? Query
This query requests the instrument to identify itself. The 1257
responds to this query with the following reply:
Racal Instruments 1257 Switch System,<revision>
This reply indicates the manufacturer of the instrument is EADS
North America Defense Test and Services, that it is a 1257 Switch
System, and the current firmware revision. The firmware revision is
a numeric, floating point value. An example firmware revision is
“3.10". A sample is shown below:
Racal Instruments 1257 Switch System,3.10
*RST Command
The *RST command resets the instrument to its power-on default
state. These settings are shown in
Table 5-1
of this manual.
This command does
NOT
change the value of SCPI Operation or
Questionable status registers or IEEE-488. 2 status registers,
condition registers, or enable registers. This command does
NOT
clear the error message queue, the input command buffer, or the
output reply buffer.
Table 5-1, Power-On and Reset State
Attribute
Related Command(s)
Reset State
Relay States
*RCL 0
OPEN
CLOSE
The states are recalled from non-volatile
memory location 0 (power-up state). As
shipped from the factory, these are all in the
OPEN position.
Trigger Input Source
TRIGGER:SOURCE
IMMediate
Trigger Count
TRIGGER:COUNT
1
Trigger Input Delay
TRIGGER:DELAY
0.0 seconds
Trigger Output
OUTPUT:TRIG
Off
Trigger Output Delay
OUTPUT:DELAY
0.0 seconds
Confidence Mode
MONITOR:STATE
Off
Pathname List
ROUTE: PATH
Pathnames stored in non-volatile memory
are automatically recalled at power-up.
Scan List
ROUTE: SCAN
No Scan List Defined
Include List
ROUTE: INCLUDE
No Include Lists Defined
Exclude List
ROUTE: EXCLUDE
No Exclude Lists Defined
Summary of Contents for 1257
Page 6: ......
