1257 User Manual
Rack Mounting B-2
EADS North America Defense
Test and Services, Inc.
©
2001
4. Determine the mounting placement of the 1257 chassis in the
rack. Once placement has been determined, install the short
mounting brackets P/N 921656 on the front of the rack and
the long mounting brackets P/N 921656-001 in the rear of the
rack with user-provided hardware suitable for the rack used.
Insure that the brackets are installed on the inside surfaces of
the mounting rails.
5. Using the hardware found in the slide mount kit P/N 921657-
026, secure the slides to the front and rear brackets installed
in the prior step. Each bracket will require two fasteners.
6. Insert the 1257 enclosure mounting rails into the slide. This
completes the installation of the slide kit.
Figure B-1, Installing the Slide Kit
Summary of Contents for 1257
Page 6: ......