Racal Instruments 1257 Manual Download Page 166

Page: 166 / 178

1257 User Manual

EADS North America Defense

Rack Mounting B-1

Test and Services, Inc.

2001

Appendix B

RACK MOUNTING

Items Included

The rack slide-kit, P/N 407813, includes the following items.

Item Description

Qty.

Part

Number

Slide Bracket, Short

921656

Slide Bracket, Long

921656-001

Slide Mount Kit (With Slides,

Instructions and Mounting Hardware

1 921657-026

CAUTION:

DO NOT attempt to support the mainframe in the rack with
the rack mount ears only. Right angle runners or a base
plate MUST be used to support the mainframe if slides are
not used.

Installing the 1257
Using Slides and
Mounting
Brackets

NOTE:

There is no need to open the unit.

1. Place system on a secure work surface.

2. Extend each slide to its full length and by pressing the

release levers on the slide, remove the instrument mounting
extension bar from the rest of the slide.

3. Using the hardware found in the slide mount kit P/N 921657-

026, attach the instrument mounting extension bars to the
1257. Each extension bar requires four fasteners to properly
secure the 1257 chassis.

Summary of Contents for 1257



















































































































































































Search results

Summary of Contents for 1257

Reviews:

Related manuals for 1257

Brands by name

Popular brands

Racal Instruments 1257, Manual

Search results

Summary of Contents for 1257

Reviews:

Related manuals for 1257

Brands by name

Popular brands