1257 User Manual
EADS North America Defense
Computer Interfaces 4-7
Test and Services, Inc.
©
2001
3 and 4 may differ):
-----SETTINGS-----
> Remote: TCP/IP <
Option: IP_Oct_1
Status: 0
3. Press the third key, selecting line 3. Rotate the knob until line 3
reads as follows (line 4 may differ):
-----SETTINGS-----
Remote: TCP/IP
> Option: Addr_Mode<
Status: Auto_DHCP
4. If line 4 already indicates the Manual Set mode, no further
action is necessary. Otherwise, select line 4. Rotate the knob
until the display reads:
-----SETTINGS-----
Type: TCP/IP
Option: Addr_Mode
<Update?: Man_Set
Then press key 4 again to select the Manual Set mode. This
temporarily disables the TCP/IP interface, allowing you to
change the TCP/IP settings.
Setting the TCP/IP Address
1. Once you have selected the Manual Set Mode, you may set
the TCP/IP address. Press key 3 to select line 3. Rotate the
knob until line 3 appears as follows (line 4 may differ):
-----SETTINGS-----
Type: TCP/IP
> Option: IP_Oct_1 <
Status: 0
This prepares the 1257 to set the first octet (eight bits) of the IP
address.
2. Select line 4. Rotate the knob until line 4 (the Status line)
displays the first octet of your desired IP address. For example,
if you wish to set the IP address to “197.23.0.123”, rotate the
knob until line 4 shows the first octet, i.e. “197” (if line 4 already
shows the desired octet, then skip to the next step).
-----SETTINGS-----
Type: TCP/IP
> Option: IP_Oct_1 <
<Update?: 197
Then press key 4 again to confirm.
3. Select line 3. Rotate the knob until line 3 shows “IP_Oct_2” as
follows:
-----SETTINGS-----
Summary of Contents for 1257
Page 6: ......
