3
rd
Generation Compact RDMS
TM
Telemetry Receiver
24
Quasonix, Inc.
4.3.2
Additional Command Set Details
4.3.2.1
Antenna Control Unit - ACU
The ACU command displays and controls the antenna control unit settings.
ACU [M <m>|C <e>|O <s>]
M <m> - Sets antenna control mode to <m>
where: <m> - Control mode
M - AGC time constant and AM bandwidth set manually
S - AGC time constant and AM bandwidth set based on antenna scan
C <e> - Sets AGC compensated AM enable to <e>
where: <e> - Enable
0 - Disabled
1 - Enabled
O <s> - Sets antenna control output to <s>
where: <s> - Signal source
0 - Channel 0
1 - Channel 1
C - Combiner
ACU [S [T <t>|R <r>]] - Antenna scan settings
T <t> - Sets antenna mode scan type to <t>
where: <t> - Scan type
C - Conical scan
E - E-scan
R <r> - Sets antenna mode scan rate to <r>, 10.00 to 50.00 Hz
ACU [AM [<p>|S <s>|B <b>]] - Antenna control unit AM settings
<p> - Sets AM output polarity to <p>
where: <p> - Polarity
{0|+} - Normal
{1|-} - Inverted
S <s> - Sets AM output scale to <s>, -128.0 to 128.0
B <b> - Sets manual mode AM detector bandwidth to <b>, 5.00 to 50000.00 Hz
