3
rd
Generation Compact RDMS
TM
Telemetry Receiver
64
Quasonix, Inc.
SDI T
- Sets signal degradation information tracking display enable or disable parameters
Examples:
SDI T 0
Disable SDI tracking display
SDI T 1
Enable SDI tracking display
4.3.2.35 Spectrum Inversion - SI
The SI command displays and controls receiver spectrum inversion.
SI [<e>]
where: <e> - Enable
0 - Disabled
1 - Enabled
Example:
SI
Spectrum inversion is disabled
4.3.2.36 Show Serial Number - SN
The SN command displays the part number and serial number for the connected RDMS™.
Example:
SN
Part Number: QSX-RDMS-3R1D-A1-1311-00-14-K7-EQ
Customer Model: CHANNEL 1
Serial Number: 2091
Hardware Rev:
4.3.2.37 Save Parameters - SV
The Save Parameters command erases the stored parameter set and writes the current operating parameter set into
the stored parameter set in a single command.
Example:
SV
Saving parameter data... ok
4.3.2.38 Sync Detect - SYNC
The Sync Detect command displays and controls sync detect settings.
SYNC <e>
- Sets sync detect enable to <e>
where: <e> - Enable
0 - Disabled
1 - Enabled
