DLT VS160 Tape Drive Installation and Operations Guide
81-81191-01 Rev A01
January 2004
3-17
3.3.5 Completing the Installation
1.
Secure your DLT VS160 internal tape drive with the necessary mounting screws, either in the sides
or bottom of the tape drive sled, as appropriate for the server or workstation chassis. Reference
Figure 3-12
for an example.
N
OTE
:
Some servers and workstations require mounting rails for internal
devices. Contact your server or workstation manufacturer for information.
2.
Replace the cover on the server or workstation.
3.
Connect the power cord to the server or workstation and any peripheral devices that you detached
earlier.
4.
Power on the server or workstation and allow its operating system to start.
5.
Check your tape drive to make sure it is working properly. Refer to
“Indicator Activity During
Power-On Self-Test (POST)” on page 4-2
to learn about your tape drive’s self-test and
initialization features.
Figure 3-12.
Securing the Internal Tape Drive in the Installation Bay
Summary of Contents for ValueLoader DLT VS160
