Chapter 4: Using Your Tape Drive
4-8
January 2004
81-81191-01 Rev A01
4.2.3 Write-Protecting the Data Cartridge
All data cartridges have a write-protect switch to prevent accidental erasure of data. Before loading a
data cartridge into your tape drive, make sure to position the write-protect switch on the front of the
data cartridge as desired.
Figure 4-4.
DLTtape VS1 Data Cartridge Write-Protect Switch
Write
Protected
Slide the switch
to the right
to write-protect the data cartridge. A “locked”
icon appears on the switch indicating that the data cartridge is write-protected.
Write
Enabled
Slide the switch
to the left
to allow your tape drive to write data to the data
cartridge. The “unlocked” icon appears on the switch. The indicator on the top
of the data cartridge also points to the appropriate icon, indicating the write-
protected status.
Write enabled
Write
protected
Indicator
Write-protect
switch
Summary of Contents for ValueLoader DLT VS160
