![background image](http://html2.mh-extra.com/html/quantum/valueloader-dlt-vs160/valueloader-dlt-vs160_installation-and-operation-manual_4073110022.webp)
Chapter 3: Installing Your Tape Drive
3-6
January 2004
81-81191-01 Rev A01
4.
Connect one end of the SCSI cable to one of the connectors on the rear panel of your tape drive as
shown in
Figure 3-3
. Either SCSI connector works equally well.
Figure 3-3
does not show a
terminator because none of the three tape drives in the illustration are at the end of the SCSI bus.
5.
Connect the other end of the SCSI cable to the connector on your SCSI host adapter or to the
connector on the previous SCSI device on the SCSI bus as shown in
Figure 3-4
.
Figure 3-3.
Tape Drive SCSI and Power Cable Connections
Figure 3-4.
Server SCSI Cable Connections
Power
cords
To next
device
To SCSI
host adapter
SCSI host
adapter
SCSI
cable
Summary of Contents for ValueLoader DLT VS160
