Quantum Scalar i2000, User Manual, Page: 95 / 120

ADIC Management Console User’s Guide 87
Making VPM assignments
1 Right-click the SCSI channel that has been set to Target .
2 Select Virtual Private Map .
The VPM dialog box opens.
The ID/LUN/Device column of the VPM display provides map space for IDs 0-15 associated with the
selected SCSI channel, LUNs 0-7 associated with each ID, and a box into which a device from the
Device column can be dragged and dropped in order to occupy a particular ID and LUN on the SCSI
host channel. For information about device numbering, refer to Device Numbering on page 30.
Drag and drop the devices from the Device column to the appropriate LUN in the ID/LUN/Device
column.
When a target device has been mapped, it is displayed in gray in the Device column.
To see the grayed out images of the Fibre Channel devices, scroll the Device column down to the
higher LUN range to which these devices were mapped during discovery.
3 Select OK to save mapping.
The VPM map is automatically saved as part of the configuration.
The message Made Virtual Private Mapping changes appears in the Status/Message Area .
Note
If you right-click a SCSI channel not set to Target , or if you have not enabled
VPM, the VPM command on the selected SCSI channel is not available.