Quantum Scalar i2000, User Manual, Page: 86 / 120

78 Configuring SAN Access
Figure 11 Scalar Firewall Manager access settings dialog box
Figure 11 shows labeled components of the Scalar® Firewall Manager Access Settings dialog box.
Registered hosts are shown in the column on the left. When a host is online its name is displayed in
black.
When a host is registered but not currently online its name is displayed in blue.
To have complete host information appear in the display, you must first be running HRS. Consult your
service representative.
4 Select the Assigned LUN check boxes to indicate that access is enabled between a LUN and the
corresponding host. Select again to revoke access.
• To select or deselect access to every LUN in a particular host’s line, use the Select All or
Deselect All buttons located on the right side of the screen.
Note
Hover the mouse over a LUN or a host in order to have details about it display
in a blue popup.