Quantum Scalar i2000, User Manual

Page: 105 / 120

ADIC Management Console User’s Guide 97
Figure 25 SNC 4000 Ready LED
Figure 26 ADIC 3000 Ready LED
5 After you have identified the appliance, select Cancel in the Flash Ready LED dialog box to return the
RDY LED to normal functionality.
Monitoring Environmental Data
Not all appliances in the SAN are capable of providing this data. If the appliance you select is not capable
of communicating this information,
Get Environmental Data does not appear on the appliance menu.
1 Right-click an appliance in the navigation panel or the graphical panel.
2 Select Get Environmental Data .
3 The Environmental Data dialog box is displayed.
Real-time measurements are indicated by the white pointers in each graphic.
The nominal range for each parameter is all values between the yellow bars.
The warning ranges for each parameter are the ranges at either end, bordered by one yellow bar and
one red bar.
The alarm ranges for each parameter are the ranges at either end, bordered by one red bar and the
absence of a bar.
Ready LED
Ready LED