ADIC Management Console User’s Guide
77
Installing SFM
Installation of SFM into a system with a developed SAN is different than installation of SFM into a new
system.
1
Log in as SAN administrator, portal administrator or power user.
2
If you want to install the host registration service (HRS) on the hosts that are involved, consult your
service representative.
3
If you are installing SFM as part of a new SAN installation, proceed to
Step 4
. For installation into a pre-
existing SAN, proceed to
Step 5
.
4
If you are installing SFM into a pre-existing SAN, follow these steps:
a. Install HRS on the hosts.
b. Leave the hosts running.
c. Enable SFM. Refer to
Enabling Licensed Features
on page 71.
d. Right-click the appliance with SFM enabled.
e. Select
Refresh Data
. Refer to
Refreshing Data
on page 58.
f. Proceed to
Step 6
.
5
If you are installing SFM into a new SAN, follow these steps:
a. Load HRS onto the hosts.
b. Shut the hosts down.
c. Restart the appliance. Refer to
Using Restart
on page 60.
d. Start up the hosts.
e. Enable SFM. Refer to
Enabling Licensed Features
on page 71.
f. After the hosts are finished booting, right-click the appliance with SFM enabled.
g. Select
Refresh Data
. Refer to
Refreshing Data
on page 58.
h. Proceed to
Step 6
.
6
Expand all node symbols to display all hosts, devices and their assigned LUNs. Refer to
Device
Numbering
on page 30.
Configuring Access Through SFM
Configure access to certain LUNS for certain hosts. Other hosts will no longer see those LUNs.
1
Make a list of which LUNs you want to assign to which hosts.
2
From the navigation panel or the graphical panel, right-click the appliance with SFM enabled.
3
Select the
Access Options
menu, select
Scalar® Firewall Manager
.
The
Scalar® Firewall Manager Access Settings
dialog box is displayed. See
Figure 11
on page 78.
Note
Basic users are not authorized to configure SFM. If the portal administrator or
power user have access to a portal with only partial access to the SFM
configuration, only the SAN administrator can modify access.
Summary of Contents for Scalar i2000
