ADIC Management Console User’s Guide
55
Discovering the SAN
This section contains procedures for establishing and modifying the elements of the SAN.
1
Log on as SAN administrator.
2
Select the
Admin
menu, point to
Discover SAN
, then select
Modify Discovery Configuration
.
The
Discovery Configuration
dialog box opens.
All IP addresses are entered in dotted quad format, xxx.xxx.xxx.xxx.
3
Select a segment.
4
Do one of the following:
To add a network segment for discovery, select
Add
. The
Segment Configuration
dialog box is
displayed. Proceed to
Step 5
.
To reconfigure an existing segment, select the segment. Then select
Change.
The
Segment
Configuration
dialog box is displayed. Proceed to
Step 5
.
To delete an existing segment, select the segment. Then select
Delete
. Proceed to
Step 10
.
5
Name or rename the segment by typing directly into the
Segment Name
text box. It is not mandatory
to name or rename a network segment.
6
Select the radio button for
Single IP Address
or
IP
Address Range
as needed, and the number of
entry boxes defaults appropriately. Type the IP Address(es) that you want to have discovered. Do this
if you are adding a segment or if you are modifying an existing segment.
7
Select
Add
. The new segment moves to the list of
IP Addresses to be discovered
at the bottom of the
dialog box. If you are adding a new segment, proceed to
Step 12
. If you are modifying an existing
segment, proceed to
Step 8
.
8
Select the statement for the segment that you no longer want to have discovered and then select
Delete
. The
Delete
button is only enabled when a segment in the box to its left (
IP Addresses to be
discovered
) is selected.
If you are adding a new segment, complete the configuration by proceeding to
Step 12
.
If you are modifying a configuration and you want to modify the advanced discovery configuration
parameters, proceed to
Step 12
.
If you are modifying a configuration and you are satisfied with the existing advanced parameters,
proceed to
Step 9
.
9
Select OK on the
Segment Configuration
dialog box.
10
Select OK on the
Discovery Configuration
dialog box.
A warning is displayed.
11
Select
Yes
to accept the update or
No
to close the dialog box without making changes.
12
To configure advanced discovery configuration parameters, select
Advanced
tab on the
Segment
Configuration
dialog box.
13
Consider the following when you configure the parameters:
•
Type the IP addresses of systems you do not want to discover in the middle box of the
Advanced
tab.
•
Optional parameters like the
SNMP Timeout
value, and the
Read Community
setting for a
new segment, are not associated with a new discovery segment unless you type them in the
text boxes on the
Advanced
tab.
Summary of Contents for Scalar i2000
