background image

5-144 Menus and Commands

 

6-00054-02 Rev A

If Y is selected for the Accept parameter, the Include 
Drives Dialog appears. See Figure 5-207. Otherwise, the 
changed parameters continue to display but no action is 
taken.

Figure 5-207

Include Drives Dialog

Parameter

Value

Include Drives

Y

 indicates that the drives will 

be included in the cycling of 
the cartridges.

N

 indicates that the drives will 

not be included in the cycling 
of the cartridges.

Accept

Y

 to accept the changes

N

 to reject the changes

If Y is selected for the Accept parameter value, the 
Response Dialog appears. See Figure 5-208. Otherwise, 
the changed parameters continue to display but no action 
is taken.

Figure 5-208

Response Dialog 

Parameter

Value

Cycle

Indicates the number of 
completed test cycles of the 
requested cycles.

Status

Shows the status of the 
indicated cycle (Running, 
Completed, Error, Canceled).

Cancel

Y

 to cancel the test

N

 to continue running the test

Include drives: Y

Accept: Y

Demo with Drives

Cycle :5 of 9

Status:Running

Cancel: N<

Note

If the operation 
stops, the Cancel 
parameter no 
longer displays.

Summary of Contents for Scalar 1000





























































































































































































































































































Reviews: