Using Cleaning Cartridges
6-25
22 June 2004
Using Cleaning Cartridges
This section contains the following information:
•
Inserting a Cleaning Cartridge
•
Ejecting a Cleaning Cartridge on page 26
•
Declaring a Cleaning Cartridge on page 27
•
Viewing Cleaning Cartridge Status on page 28
Inserting a Cleaning Cartridge
Path:
Commands Menu
Insert/Eject
Submenu
Insert Clean Tape Dialog
For further information refer to Insert Clean Tape Dialog on
page 5-47.
Proceed as follows to move cleaning tapes into the library:
Step 1
Follow the path and the Insert Clean Tape Dialog
appears. See Figure 6-5.
Figure 6-5
Insert Clean Tape Dialog
Step 2
Enter the source Coord, Index, and Accept. The
Insert Range Dialog appears. See Figure 6-6.
Figure 6-6
Range Dialog
Note
It is possible to
use the I/E
Station as storage
for cleaning
media but is not
recommended.
Enter SOURCE
Coord: I 01< 1 A 01
OR Element: 00001
Accept: N
Insert Range: 01<
Accept : N
Summary of Contents for Scalar 1000
