Service Menu
5-117
22 June 2004
DI/DO Submenu
Path:
Main Menu
Service Menu
Diags
Submenu
DI/DO Submenu
Use the (Digital Input/Digital Output)
DI/DO
Submenu
to
perform system tests. See Figure 5-161.
Figure 5-161
DI/DO Submenu
Depending on your selection, you have the following options:
•
Loopback Dialog
•
Sensors Submenu on page 5-118
•
Locks Dialog on page 5-121
Loopback Dialog
Path:
Main Menu
Service Menu
Diags
Submenu
DI/DO Submenu
Loopback Dialog
Use the
Loopback Dialog
to send test signals from the
main control card to other system cards and return.
See Figure 5-162.
Figure 5-162
Loopback Dialog
Parameter
Value
Device
Indicates the loopback tests to
run (LMC, LGR, LPN).
Number
Indicates which device
number should be tested. This
field is always set to 01 because
there is only one of each device
to be tested in the Scalar 1000.
>
Loopback
...
Sensors
Locks
...
Device: LMC
Number: 01
Results:
Accept: N
Summary of Contents for Scalar 1000
