Setup Menu
5-79
22 June 2004
Security Dialog
Path:
Main Menu
Setup Menu
Library
Submenu
Security Dialog
Use the
Security Dialog
to change the Operator Panel
LCD Security mode or the password that protects it. The
Operator Panel can also be secured by the host. Whichever
method is used to secure the Operator Panel, it must be the
method used to release the security. See Figure 5-106.
Figure 5-106
Security Dialog
Switching Security From Off to On
Parameter
Value
Security Enabled
Y
to enable LCD security
(N indicates that LCD security
is not enabled.)
Change password
Y
if the password is to be
changed, refer to Changing the
Password on page 5-82.
N
if the password is not to be
changed.
If no password has been set
since the library was rebooted,
the operator will be forced to
change the password. Refer
to Changing the Password on
page 5-82.
Accept
Y
to accept changes
N
to reject changes
Security Enabled: N<
Change password : N
Accept : N
Summary of Contents for Scalar 1000
