![background image](http://html1.mh-extra.com/html/quantum/qxs-g2-series/qxs-g2-series_hardware-installation-and-maintenance-manual_3948266188.webp)
176 QXS G2 Hardware Installation and Maintenance Guide
4
Remove the T10 lock key.
Figure 138
Activating Anti-Tamper Lock
Removing a 2U 2.5” SFF Drive Carrier Module
The removal/replacement procedure for 2.5” SFF drive carrier modules is basically the same as for 3.5”
LFF models, except that the 2.5” SFF carriers are mounted vertically.
1
Refer to
on page 175 to unlock the anti-tamper lock on the drive
module to allow removal of the drive module.
2
Press the latch in the carrier handle downward to release the carrier handle so that it can revolve
outward as shown below.
Figure 139
Removing 2.5” SFF Drive Carrier Module-1
3
Gently move the drive carrier module outward from the drive slot.
1
2
3
4
1
Indicator Aperture: Locked
2
Anti-Tamper Lock: Locked Position
3
Indicator Aperture: Unlocked
4
Anti-Tamper Lock: Unlocked Position
1
2
Summary of Contents for QXS G2 Series
