![background image](http://html1.mh-extra.com/html/quantum/qxs-g2-series/qxs-g2-series_hardware-installation-and-maintenance-manual_3948266204.webp)
192 QXS G2 Hardware Installation and Maintenance Guide
3
Pull the drawer outward until it locks at the drawer stops as shown in
The drawer is shown empty, which is how the chassis is delivered.
Figure 148
Opening a Drawer-2
IMPORTANT:
The drawer must not remain open for more than two minutes whilst the chassis is
powered on.
Closing a 5U84 Drawer
1
Press and hold the black latches on the sides of the open drawer in each extended top rail.
shows a magnified detail of a slide latch, which resides on the left and right drawer
rails.
2
Push the drawer in slightly.
3
Release the drawer latches.
4
Push the drawer all the way into the chassis, making sure that it clicks home.
Replacing a 5U84 DDIC
This procedure describes removal and installation of a Disk Drive in Carrier (DDIC). Illustrations in the
DDIC replacement procedures show drawer-centric views of the chassis, and DDICs are properly
aligned for insertion into the disk slots.
Comply with all ESD precautions. Refer to
on page 165 for additional information.
Removing a 5U84 DDIC
NOTE:
Remove a DDIC only if a replacement is available. Closing a drawer with one or more drives
missing can potentially cause cooling problems. See also
Side Rail Latch Inset
Summary of Contents for QXS G2 Series
