Quantum QXS G2 Series, Hardware Installation And Maintenance Manual

Page: 132 / 246

120 QXS G2 Hardware Installation and Maintenance Guide
2U Chassis Drive LEDs
Drive status is monitored by a green LED and an amber LED mounted on the front of each drive
carrier module, as shown in Figure 100 .
• In normal operation the green LED will be on, and will flicker as the drive operates.
• In normal operation the amber LED will be:
• Off if there is no drive present.
• Off as the drive operates.
• On if there is a drive fault.
Figure 100 2U Chassis Drive LEDs
The drive module LED conditions are defined in Table 14
2.5 Inch Drive
3.5 Inch Drive
Amber LED
Amber LED
Green LED
Green LED
Table 14 2U Drive LED States
Drive LED
(Green)
Drive LED
(Amber)
Status
Off Off No drive module installed
On/Blinking Off Drive module is installed and operational
On Blinking: 1s on/1s
off
SES device identity set
On On SES device fault bit set