Quantum QXS G2 Series, Hardware Installation And Maintenance Manual

Page: 72 / 246

60 QXS G2 Hardware Installation and Maintenance Guide
1 Examine the packaging for crushes, cuts, water damage, or any other evidence of mishandling
during transit.
• If you suspect that damage has happened, photograph the package before opening, for
possible future reference.
• Retain original packaging materials for use with returns.
2 The unpacking sequence pertaining to 2U chassis is shown in Figure 58 .
Figure 58 Unpack 2U Chassis (2U24 Chassis Shown)
The 2U chassis are supplied with the midplane PCB, PSUs, drives, and RAID controllers and/or
expansion IOMs installed. For information about plug-in module replacement, see “Module removal
and replacement”. Drive blanks must be installed in unused drive slots.
3 The unpacking procedure pertaining to the 5U84 is shown in Figure 59 .
CAUTION: The chassis does not include DDICs, but all rear panel modules are installed.
• This partially-populated chassis is quite heavy: 64 kg (142 lb).
• Verify that each strap is securely wrapped and buckled.
• Four people are required to lift the 5U84 from the box.