C
HAPTER
T
ITLE
W
EB
G
RAPHICAL
U
SER
I
NTERFACE
(GUI)
FOR
ESMS
4-38
Procedure:
1. In the Alert Policy Tab, select the slot for which you have
to configure the Alert policy. That is, In the
Event Filter
Entry Page
, if you have chosen Alert Policy number as 4,
you have to configure the 4th slot (the slot with Policy
Number 4) in the Alert Policy Tab.
2. Select the slot and click
Add
to open the
Add Alert Pol-
icy Entry Page
as shown in the screenshot below.
Figure 4-27. Add Alert Policy Entry Page
3.
Policy Entry #
is a read only field.
4. Select the
Policy Number
from the list.
5. In the
Policy Configuration
field, check
Enable
if you
wish to enable the policy settings.
6. In the
Policy Set
field, choose any of the Policy set from
the list.
7. In the
Channel Number
field, choose particular channel
from the available channel list.
8. In the
Destination Selector
field, choose particular desti-
nation from the configured destination list.
9. In the
Alert String
field, enable the check box if the Alert
policy entry is Event Specific.
10.In the
Alert String Key
field, choose any one value that is
used to look up the Alert String to send for this Alert Pol-
icy entry.
11.Click
Add
to save the new alert policy and return to Alert
Policy list.
12.Click
Cancel
to cancel the modification and return to Alert
Policy list.
13.In the Alert Policy list, to modify a configuration, select the
slot to be modified and click
Modify
.
Add
To save the new alert policy and return to Alert
Policy list.
Modify
To modify the existing entries.
Cancel
To cancel the modification and return to Alert
Policy list.
Table 4-25: PEF Management - Alert Policy (Continued)
I
TEM
D
ESCRIPTION
Note:
LAN Destination has to be configured under
Configuration >
PEF > LAN Destination
. That is if you select the number 4
for destination selector in Alert Policy Entry page, then you have
to configure the 4th slot (LAN Destination Number 4) in the LAN
Destination tab.
Summary of Contents for STRATOS S210 Series S210-X12RS
