QUANTA STRATOS S210 Series S210-X12RS, Technical Manual

Page: 212 / 272

C
HAPTER
T
ITLE
W
EB
G
RAPHICAL
U
SER
I
NTERFACE
(GUI)
FOR
ESMS
4-39
14.In the Modify Alert Policy Entry Page, make the neces-
sary changes and click Modify .
15.In the Alert Policy list, to delete a configuration, select the
slot and click Delete .
PEF Management LAN Destination Page
This page is used to configure the Event filter, Alert Policy and
LAN destination. A sample screenshot of PEF Management
LAN Destination Page is given below.
Figure 4-28. PEF Management LAN Destination
The fields of PEF Management – LAN Destination Tab are
explained below.
Table 4-26: PEF Management - LAN Destination
I
TEM
D
ESCRIPTION
LAN Destination
Displays Destination number for the newly
configured entry (read-only).
Destination Type
Destination type can be either an SNMP Trap or
an Email alert.
For Email alerts, the 3 fields - destination Email
address, subject and body of the message
needs to be filled. The SMTP server information
also has to be added - under
Configuration
> SMTP
.
For SNMP Trap, only the destination IP address
has to be filled.
Destination Address
If Destination type is SNMP Trap, then enter the
IP address of the system that will receive the
alert. Destination address will support the
following:

IPv4 address format.

IPv6 address format.
If Destination type is Email Alert, then give the
email address that will receive the email.
Subject & Message
These fields must be configured if email alert is
chosen as destination type. An email will be sent
to the configured email address in case of any
severity events with a subject specified in
subject field and will contain the message field's
content as the email body.
Add
To save the new LAN destination and return to
LAN destination list.
Cancel
To cancel the modification and return to LAN
destination list.