QUANTA STRATOS S210 Series S210-X12RS, Technical Manual

Page: 204 / 272

C
HAPTER
T
ITLE
W
EB
G
RAPHICAL
U
SER
I
NTERFACE
(GUI)
FOR
ESMS
4-31
The fields of Mouse Mode Settings page are explained below.
Procedure:
1. Choose either of the following as your requirement:

Set Mode to Absolute

Set Mode to Relative
2. Click Save button to save the changes made.
3. Click Reset to reset the modified changes.
Network
In MegaRAC GUI, the Network Settings Page is used to config-
ure the network settings for the available LAN channels.
To open Network Settings page, click Configuration > Net-
work from the main menu. A sample screenshot of Network
Settings Page is shown in the screenshot below.
Figure 4-23. Network Settings Page
The fields of Network Settings page are explained below.
Table 4-22: Mouse Mode Settings Page
I
TEM
D
ESCRIPTION
Absolute Mode
The absolute position of the local mouse is sent
to the server.
Relative Mode
Relative mode sends the calculated relative
mouse position displacement to the server.
Save To save any changes made.
Reset To Reset the modified changes.
Note:
Applicable for all Widnows versions, versions above RHEL6, and
versions above FC14.
Note:
Applicable for all Linux versions, versions above RHEL6, and ver-
sions less than FC14.